Top up

Devices and cables – What is what?

Modem? UTP cable? Wall socket? At BASE, we often refer to various devices and cables. If you are not exactly sure what we mean, have a look at this handy summary!

We cannot retrieve your data. Please make your own choice.

Hardware

You have this

Cables

You have this

Connection

You have this

Hardware

You have this

Cables

You have this

Connection

You have this

BASE Modem

Your modem is the cornerstone of your home network, and its purpose is to connect your devices to our network. PC, TV box, tablet... you use a cable to connect them to your modem. Your modem also provides wifi.

BASE TV box

The BASE TV box is a TV box on which you can stream your favourite apps. We have already installed the BASE TV app for you. You can connect the TV box to your TV screen with an HDMI connection.

Basic setup

The basic setup consists of your modem and network interface unite. You need these to enjoy your BASE services.

Network interface unit (NIU)

This is a distribution device that splits the incoming signals for connection to
your modem and possibly other devices. It is also called a ‘network hub’.

UTP wall socket

That is a socket for connection of your internet, interactive BASE TV and fixed
telephony.

Conduit

This is a plastic pipe that coax and UTP cables pass through.

Wi-Fi booster

Thanks to the Wi-Fi boosters, you can increase your internet coverage at home. At BASE you use the Wi-Fi mesh Deco X60 from TP Link

Distribution cable

This is the coax cable that runs from the distribution point on your street to the basic setup in your home.

HDMI cable

This is a cable to connect your TV to your BASE TV box. The HDMI cable provides
high-definition (HD) picture and sound.

Network cables or UTP cable

With a network cable, you can connect your devices directly to the BASE modem. This usually provides a more stable connection than Wi-Fi.With BASE, all you need is an RJ45 UTP cable with flat ends.

To get fixed internet from BASE in your home, your basic setup must be connected to a distribution point via a drop cable. You choose the nearest distribution point on your street. It may be underground, on a pole or on a facade.

In a grey box

Often on the property  boundary with your neighbour, on the footpath. This could also be a few houses away or across the street.

On a pole

Often together  with electricity and street lighting. This can also be across the street.

On a facade

Often at the level of the first floor or under the gutter. This could also be by  the neighbours or  even further away.