Top up

Installing my BASE TV box

Installing your BASE TV box is very easy. You'll be ready to watch TV in 1, 2, 3!

Before you begin...

Don't have an internet connection yet? Then install it first. Next, carefully check that the package contents are complete:

 

 

BASE TV box (with Velcro strip)
HDMI cable
Remote control
Network cable (UTP)
USB cable
Adapter

The three-step installation

Connect the HDMI cable, USB cable, and internet cable as shown on the image below. Only use the included cables. This way you are sure of the best image and sound quality. You can stick the TV-box to the back of your screen with the velcro strip. Then the TV box and those pesky cables hang out of sight!

Note: Plug the power adapter into the mains socket after you have connected all the cables.

Tip: Your BASE TV box works best with a network cable. Using a cable reduces the risk of interference. If there is no internet port nearby, connect your TV box to wifi.

First take the remote control for the BASE TV box
  • Switch on your TV set, and press the Source button on your remote control. This button may also be labelled ‘Input’ or ‘AV’, depending on which TV you have:

AV

Source

EXT

  • Select the HDMI port that the BASE TV box's HDMI cable is connected to.
  • The home screen of the TV box appears. 
Now take the remote control for the BASE TV box

Follow the steps on the screen.

  • Wait for the installation to finish. This can take up to 10 minutes. The screen may go black a few times during the installation process.
  • When the Terms of Use screen appears, the installation is finished.
  • Use the down arrow button to scroll down, and use the OK button to choose whether or not you want to accept personalized advertising. 
  • Pull out the plastic tab on the back of the BASE remote control. 
  • Press the down arrow button once. 
  • Wait 10 seconds for the remote control to pair with the BASE TV box. 
  • Not working? Then follow the on-screen instructions.

Enjoy watching!